No. 1

Thumb Screw for Corner Pole, ½” x 1”

No. 2

Hexagonal Nut welded to Corner Pole

No. 3

2” x 6’6” Regular Corner Pole

No. 4

Pressed Steel End, for Corner Pole

No. 5

Coupling Nut only for Gable or Eaves.  Check up on Bolt No. 15 to see if also needed. 1 No. 15 with 2 No. 5 complete with Rivets.

No. 6

Pressed steel end for Truss Hickory (for Eaves only) complete with Rivets

No. 7

Hickory Strips ¾” x 2” complete with Rivets for Truss. State length.

No. 8

Cross Bar complete with Pressed Steel Ends and Spring. 12’, 14’, 15’, 16’.

No. 9

Stud Bolt Eaves 5/8” x 3 ¾” with Rivets

No. 10

Pressed Steel End for Connecting Bar, Nut Welded On.

No. 11

Connecting Bars, complete with Pressed Steel Ends with Nuts Welded On. Standard Size: 9’4” for No. 1, 2, 3, 4 – 1 piece.
1 pc.  11’4” for No. 12, 24, 36, 48
2 pc.  13’4” for No. 14
2 pc.  15’4” for No. 16
3 pc.  15’4” for No. 16
1 pc.  8’4” for No. 16
Hearse Sizes:  9’4” for No. 5, 20 – 2 pcs.
2 pc.  11’4” for No. 6, 112
2 pc.  13’4” for No. 7, 114
3 pc.  14’4” for No. 115
3 pc.  15’4” for No. 8, 116
2 pc.  8’4” for No. 9

No. 12

(Replaced by No. 19)

No. 13

(Replaced by No. 19)

No. 14

Pressed Steel End for Truss Hickory (for Gable Only) complete with Rivets

No. 15

Stud Bolt 5/8” x 3 ¾” for Gable with Rivets. Check up on No. 5 Coupling Nuts to see if they are also needed. 1 Stud Bolt 5/8” x 3 ¾” with 2 No. 5 Coupling Nuts and Rivets for Cable or Eaves.

No. 16

Swivel with 2 Stud Bolt Rivets

No. 17

Truss Hook

No. 18

Connecting Bars (Same as No. 11)

No. 19

Wing Headed Coupling Bolt ½” x 3 ¼” (not illustrated) for attaching connecting bars to trusses

No. 20

Brace Rod

No. 21

Brackets for Brace Rod.  Complete with Rivets

No. 21-A

Auxiliary Arch for any size Steril Chapel Tent with Hickories

No. 21-B

Hickory Strip for Auxiliary Arch 5/8” x 1 ¾” (any length)

No. 21-C

Removable Corner Pole, 2” outside diameter, for any size Steril Chapel Tent