FRIGID SOLVOL DRAINAGE PRE-INJECTION

When a mild fluid is needed to flush out the arterial system, we recommend Solvol pre-injection fluid. A 6 index fluid, Solvol is excellent for clearing the body to allow for better distribution and penetration of an arterial fluid. Special ingredients help prevent water-logging sometimes associated with pre-injections and also help to remove discoloration. In addition to its use as a pre-injection, Solvol is useful as a bleaching agent. It penetrates readily into the affected tissue and remarkably reduces the objectionable discoloration. Because of its low formaldehyde content and proper modifiers, Solvol is an excellent fluid for embalming infants. The delicate tissue receives adequate preservative in an overall mild formulation. If death is due to contagious disease or has involved renal failure, a higher index fluid would be advisable. Packed 12 bottles per case.

Click Here To Download SDS Sheet

HOW TO USE THE FLUIDAs a pre-injection, use Solvol at a dilution of 6 to 8 ounces per gallon of diluted arterial fluid. Use 1/2 to 1 gallon of diluted fluid to clear the body, and then continue with arterial fluid injection. As a bleach Solvol may be injected hypodermically into the affected area or may be used in a pack over the area. Packs should be covered with plastic to improve penetration into the tissue and to control fumes. To embalm infants, a dilution of 8 to 10 ounces of Solvol per gallon of diluted arterial fluid is recommended. The concentration will vary with age, the condition of the body and the cause of death. Initial injection down a leg will help to determine the proper concentration and if additional dye will be of benefit.